Gages by Plasti-Fab




		Corrosion-Resistant Gages made of fiberglass reinforced plastic(FRP)

		Plasti-Fab Head Gages will not fade, chip, or warp. Used in flumes, weirs, reservoirs, basins, lagoons, waterways and other applications. They are easily installed and require little or no maintenance aside from occasional cleaning.



				Head Gages Plasti-Fab has made FIBERGLASS HEAD GAGES for use in open channel flumes for over 20 years. Due to market demand, we now offer this same durable construction in all sizes of custom level gages. Large gages are designed for viewing from a distance and are used for checking tide levels, river states, and tank levels. Small gages for flow metering are designed for use in flumes and weirs, or where level change is minimal and access is readily available. They may have a center line which divides a 6" wide gage into two separate increments, e.g. feet and CFS, 1/10 or 1/100 feet, inches and GPM, meters and liters per second or any other desired combinations. Numerals are printed in various sizes as may be required for the application. Typically 1/2" to 3/4" high numerals are used in small gages. Six inch high-visibility numerals are used on gages in bays, rivers, navigation locks and on elevated tanks. These gages are graduated in feet, tenths, meters and decimeters or anything the customer desires. Gages can and are made any reasonable length. Most gages are made 6 feet long or less for easy shipment via UPS. FRP gages do not crack or spall when damaged by river traffic or if damaged by gunshot or other vandalism. Fiberglass gages are easily mounted to any flat surface using stainless steel screws or stainless steel anchor bolts. Gages are available in slide frames which are mounted to permit easy removal of gages for cleaning.

P H O N E: 5 0 3 - 6 9 2 - 5 4 6 0