Plasti-Fab Shelters - corrosion resistance for measuring flow



		Corrosion Resistant Shelters. Year-round protection. Durable fiberglass construction requires virtually no maintenance, is electrically nonconductive, and is not susceptible to rust or decay. A wide range of styles and sizes is available.


		Fully-Insulated Large Ribbed Shelters 5-12 ft. wide X 12 - 20 ft. long

				Standard Sizes: 6' x 6' up to 12 ' x 20' long are factory assembled and can be shipped directly to the job-site. Larger custom Shelters are fabricated to ship in sections for on-site assembly. Units are available in sizes ranging up to 20' x 40'. Standard Available eave heights are 7ft., 8 ft and 12 ft. Custom, made-to-order shelters are a specialty. Plasti-Fab's reputable quality design and construction allows you to configure a virtually no-maintenance, all-plastic FRP protection for your specific control, instrumentation or equipment housing. contains no laminated mood or metal to rust or decay. • Fully Insulated • All Plastic: Low maintenance FRP • K-Factor: 0.14 BTU/hr/ft²/°F/in (R-7) • Ribbed Exterior : 2" ribbed wall with 1" thick core • Flat, Smooth Interior • Wind resistance: Withstands 125 mph • Snowload: 40 psf. • Pre-Assembled: Sizes up to 12 ft. wide • Magnetic Transparency • Tamper Resistant Door: Equipment Security • Stainless Steel Hinges: 1/2" hinge pins • Equipment Mount: laminated channel strut • Factory Assembled: Easy installation • Standard colors: Custom colors available Electrical Standard electrical packages may include a NEMA rated control panel, lights, outlets, fans, heaters, switches, pre-wired. Options Available Integral floor Door width options Raised all-weather sill Conventional flush sill Air conditioners Fire suppression equipment High performance resin Windows Skid mounting Electrical packages Sound suppression Roof hatches Lifting lugs

		Insulated Standard Small Shelters with integral floors (Models 1-6xl)

		Model 5 Sizes: Model #1: 5'-4" x 2'-4" deep Model #2: 5'-4" x 4'-4" Model #3A: 5'-4" x 2'9" Model #5: 5'-4" x 4'-9" Model #5XL: 5'-4" x 6'-9" Model #6: 5'-4" x 4'-9" with center partition Model #6XL: 5'-4" x 6'-9" with center partition		Also referred to as walk-in enclosures, Plasti-Fab offers standard sizes of corrosion resistant, fully-insulated shelters for instrumentation, controls, chlorination, sampling and communications. Having the same general benefits of our larger shelters, they feature low maintenance, electrical nonconductivity, and are not susceptible to rust or decay. Design Features: NEMA 3r or 4x Fully insulated sandwich construction Integral insulated floor for hot, cold and corrosive environments Strut for equipment mounting Low maintenance - single piece construction Exterior surface - smooth, white gelcoat Standard available colors are green, beige, tan, grey and white Standard Hardware Three point door catch Stainless steel padlockable door handle. Heavy corrosion-resistant hinges of stainless steel. Door holder keeps door open in wind. Rain drip visor over door Standard electrical packages per application. Available Options: Laminated glass or polycarbonate window NEMA 4x 15 Amp. breaker panel Sealed incandescant light 110 volt convenience outlet Weathertight exterior switch Screened vent 210 cfm dual exhaust fans 500 watt 120 volt heater 3/4" plastic floor drain Lifting eyes

		Sampler Shelters

		Model 4A Sizes: Model 4A Model 4B Portable Sampler Box		Available in fully insulated or general purpose models to provide complete security and weatherization for expensive instrument and sampler systems. NEMA 3R Corrosion Resistant Seamless Construction Integral Floor Insulated/Non-Insulated Models Available Options: Dual 100 cfm exhaust fans provide ventilation and circulation for better temperature control. 500 Watt heater with Integral Thermostat Electrical Connection 4-plex outlet Drain Fitting

		Instrumentation and Storm Covers

		Model J Instrument Cover with window Sizes: Model F Storm Cover Model I Instrument Cover Model J Instrument Cover		Low cost protection for valuable instruments. Lift-off and drop-front FRP covers provide shelter from the elements and offer security. Can be mounted on a pedestal, wall, floatwell or bolted to a concrete pad. Used in a variety of applications. Easy access: Lift-off or drop front covers Equiment security: Stainless hinges & hasps Low Maintenance: Trouble-free FRP Low-Cost Protection: for remote locations Options Fiberglass Pedestal Window FRP Mounting Channel Strip Heater Duplex Outlet